Thermoplastic Denture Adhesive is the best waterproof options for dentures, since one application will last 6-7 days without any slippage or movement.
The waterproof meaning; your denture adhesive will never wash away while you're eating or drinking.
You can continue to clean your dentures at practically anytime, as the thermoplastic will stay adhered to both upper and lower areas of your denture. No amount of soaking or cleaning will remove the adhesive until you’re ready to remove it. When you're ready to replace the application, simply run the denture over cold water and tug on whichever side that you choose and Comfort Lining will pull off in just a few pieces, leaving absolutely no residue on your denture base.
Comfort Lining never has any overflow on the dentures, meaning there will never be any denture adhesive mixing with the foods.
There is neither taste nor smell, so you'll always be able to flavor your foods the way you should.
This thermoplastic denture adhesive acts as a shock barrier that will cushion the denture for a snug secure fit.
Comfort Lining Denture Adhesive works by heat activation, when cooled turns into a firm yet soft denture cushion.
Comfort Lining was designed with you in mind and has been engineered to secure your dentures in the most comfortable and efficient manner possible. Our thermoplastic denture adhesive feels like a reline leaving a soft thermoplastic liner with a secure cushion comfort fit. Our thermoplastic denture adhesive simply
works miracles for both plastic and porcelain plates. That is why it’s been used by many people. They like it because it is safe. This adhesive needs less attention as it is able to keep your dentures on for a full week. You may use the adhesive repetitively after washing the dentures since it is designed not to wash off in water. In other words, the dentures will be unlikely to slip and fall out when properly secured with our Comfort Lining adhesive.
In addition, unlike other adhesives that can cause discomfort and gum irritation, Comfort Lining thermoplastic denture adhesive is a comfortable adhesive that can protect your mouth from infection. Gum infection can be caused by accumulation of food and/or failure to maintain proper hygienic procedures. Food accumulation promotes bacteria thus causing thrush and other burning tongue syndromes. Since our thermoplastic denture adhesive creates zero gaps, food accumulation is less likely to occur. You now possess the potential to freely remove your dentures and clean your gums easily at practically anytime. After cleaning your dentures, we encourage you to first soften the adhesive using hot water for no less than five minutes. You can heat your tube of Comfort Lining thermoplastic denture adhesive up in a container of hot water. It takes time, though. Some people find it boring and time-consuming when waiting for the adhesive to transform into a semi-liquid state. Once the denture adhesive is soft and pliable, it can be easily be applied to your dentures.
Ingredients, you ponder? No worries; our streamlined formula combines the powers of base ethylene vinyl acetate, mono and diglycerides with unrefined red palm oil for natural coloring to offer the customer an amazingly superior denture adhesive. Our product is guaranteed to be 100% free of toxic materials, such as zinc or benzene, and is proudly made in the United States of America